Downloadable DCC Sound Projects
This is a digital download service for UK DCC sound projects for the ESU LokSound v4 decoder family. Your locked sound project (locked to your decoder serial number) will be emailed to you so that you can load your own decoder using the ESU LokProgrammer.
Many of our projects have example video test runs, check to see if there is one available which you will find on the table in this page
When purchasing simply choose your desired sound project and soundscape Listen to our Soundscape samples , then enter your 8 digit decoder serial number of the LokSound decoder you intend to use the project on, in the text box provided before adding to the cart. Upon order completion your locked project file to your specific sound decoder will be emailed directly to you within 24hrs (usually the same day), ready to load yourself with out the inconvenience of waiting for postal deliveries.
The project is locked against the serial number of your decoder so it cannot be used on a different one. The project is however yours to keep and can be uploaded as many times as required, or if you wish to use the decoder in a different loco you could purchase another project against the same decoder serial number.
All of these downloadable dcc sound projects can be uploaded to your ESU LokSound v4, v4 Micro, v4 L or v4 XL decoders via your LokProgrammer. You must have access to an ESU LokProgrammer in order to upload the file to your decoder. Please note also that your LokProgrammer software should always be kept up to date as this and the projects are both regularly revised and improved. You need to have the latest software version at all times.
The serial number of your decoder can be found by following these simple instructions below.
Plug your decoder in to the decoder test board which should be connected to the LokProgrammer, ensuring a connection is made between your LokProgrammer and with your computer follow these three simple steps:
Open LokProgrammer and from the tool menu select Programmer, followed by Extended decoder information from the drop down menu as can be seen from the image below.
A blank dialogue box will now show. To populate this dialogue box with your decoder information click the Read decoder button as seen below. Your decoder is then read which will take less than 30 seconds. Under the heading SerNo: you will see your decoder’s serial number (highlighted with a red box in the image below). Make a note of this number and type it in to the decoder serial number text field on this page before ordering. That’s it! A quick and simple operation.
Once you have received your sound project file via email, upon opening within LokProgrammer you will be presented with a warning that the project is protected and can only be used on the decoder with the serial number stated (in this case FFBF6F3D) as can be seen in the image below. This image has been included as it is worth pointing out that should you not remember which project file is associated with your sound decoder, this will highlight the serial number the project has been locked to.
To learn more about MarWick Soundscape with RealDrive and listen to samples of the different soundscape options please read this article.
Downloadable DCC Sound Projects