Description
Lenz Silver mini 6 Pin Decoder
10311-02 “Silver Mini+” 0.5/0.8A with NEM 651 plug. 2 Function outputs
The Digital Plus Silver Mini locomotive decoder is suitable for all DC locomotives with continuous current draw of o.5Amp or less
Lenz Silver Mini Decoder Manual Download
Some information on Lenz Decoders well worth noting if you are considering which decoder to buy, over the years we have only experienced 1 genuine failure on a Lenz decoder and 1 failure on a controller despite having sold many hundreds. One of the main reasons for this is that accross the range of lenz decoders they are protected by good quality thermal overload circuits. A short circuit is detected but also when a long overload causing similar thermal damage occurs the drive circuit is shut down and fully protected. This means that instead of simply blowing when under conditions of short or overload like many US based decoders with inferior circuitry, they will simply cut out and allow you to reset either by thermal reset or overall reset. Essentially it is very difficult to lose a Lenz decoder through short circuit so you get a second chance instead of a puff of smoke. They are more expensive but they are worth it
The characteristics of the decoder are:
Super smooth and silent high frequency back emf motor control
Asymmetrical DCC support including directional stopping ABC
Shunting speed
Suitable for operation with 14/27 or 28/128 speed steps
Operation on conventional DC layouts is posible or may be disabled
Motor output = 0.5A continuous 0.8A max
Motor and function outputs have short circuit protection
Two function outputs rated at 100mA each with advanced function mapping
Directional or independent lighting with dimming and special effects
Support for advanced consist control and extended addressing (4 digit addresses)
Support for all forms of programming as described in NMRA RP-9.2.3
RailCom
SUSI solder points – new to 10311-02
Size: L 10.6 x W 7.5 x H 2.6
Reviews
There are no reviews yet.