Lenz Silver Mini 10310-02 Wired DCC Decoder

Description

Lenz Silver Mini 10310-02

Lenz Silver Mini Wired Decoder

10310-02 “Silver Mini+” 0.5/0.8A with cables. 2 Function outputs
The Digital Plus Silver Mini locomotive decoder is suitable for all DC locomotives with continuous current draw of o.5Amp or less.

Lenz Silver Mini Decoder Manual Download

Some information on Lenz Decoders well worth noting if you are considering which decoder to buy, over the years we have only experienced 1 genuine failure on a Lenz decoder and 1 failure on a controller despite having sold many hundreds. One of the main reasons for this is that accross the range of lenz decoders they are protected by good quality thermal overload circuits. A short circuit is detected but also when a long overload causing similar thermal damage occurs the drive circuit is shut down and fully protected. This means that instead of simply blowing when under conditions of short or overload like many US based decoders with inferior circuitry, they will simply cut out and allow you to reset either by thermal reset or overall reset. Essentially it is very difficult to lose a Lenz decoder through short circuit so you get a second chance instead of a puff of smoke. They are more expensive but they are worth it

The characteristics of the Lenz Silver Mini 10310-02 are:

• • Super smooth and silent high frequency back emf motor control
  • Asymmetrical DCC support including directional stopping ABC
  • Shunting speed
  • Suitable for operation with 14/27 or 28/128 speed steps
  • Operation on conventional DC layouts is posible or may be disabled
  • Motor output = 0.5A continuous 0.8A max
  • Motor and function outputs have short circuit protection
  • Two function outputs rated at 100mA each with advanced function mapping
  • Directional or independent lighting with dimming and special effects
  • Support for advanced consist control and extended addressing (4 digit addresses)
  • Support for all forms of programming as described in NMRA RP-9.2.3
  • RailCom
  • SUSI solder points – new to 10310-02
  • Size: L 10.6 x W 7.5 x H 2.6mm