Wickness Models, 6 Greenlea Crescent, Collin, DG1 4PR    douglas@wicknessmodels.co.uk

Lenz Gold 10433-01 8 Pin Decoder

£35.00

“Gold +” 1.0/1.8A with cable and NEM 652 plug
The DIGITAL plus GOLD locomotive decoder is suitable for all DC locomotives with continuous current draw of 1.0 Amp. or less.

  • Size: L 0.91″ x W 0.66″x H 0.2″ L 23.0 mm x W 16.5 mm x H 6.5 mm

3 in stock

SKU: 10433-01 Category: Tag:

Description

“Gold +” 1.0/1.8A with cable and NEM 652 plug
The DIGITAL plus GOLD locomotive decoder is suitable for all DC locomotives with continuous current draw of 1.0 Amp. or less.

Some information on Lenz Decoders well worth noting if you are considering which decoder to buy, over the years we have only experienced 1 genuine failure on a Lenz decoder and 1 failure on a controller despite having sold many hundreds. One of the main reasons for this is that accross the range of lenz decoders they are doubly protected by good quality circuit breaking circuits where a short circuit is detected but also where a long overload causing thermal damage. This means that instead of simply blowing when under conditions of short or overload like many US based decoders with inferior circuitry they will simply cut out and allow you ro reset the decoder either for thermal reset or overall reset. Essentially it is very difficult to lose a Lenz decoder through shorts so you get a second chance instead of a puff of smoke. They are more expensive but they are worth it

The characteristics of the decoder are:

    • Overview of the common characteristics of the GOLD-locomotive decoder:
      RailCom capable RailCom function already set at the factory
      ABC technology by Lenz
      USP – uninterrupted communication between headquarters and the decoder
      SUSI interface (except mini)
      high-frequency control of motor speed
      Motor current period / peak: 1 / 1.8 A (GOLD + Mini 0.5 / 0.8 A)
      five function outputs 500 mA load
      limit for all F-Outputs: 500 mA
      GOLD + mini: two function outputs, each with 300 mA load
      limit for all F-Outputs: 300 mA
      GOLD maxi +: eight F outputs belastba ever total of 1,000 mA
      All GOLD: function outputs timed switchable (eg for remote controlled couplings)
      Naturally short-circuit protected outputs
      continue with 2- and 4-digit addresses
      of course, also in multiple traction
      Automatic detection of digital / analog operation
      Shunting
    • Size: L 0.91″ x W 0.66″x H 0.2″ L 23.0 mm x W 16.5 mm x H 6.5 mm

Additional information

Weight 50 g
Brand

Lenz

Reviews

There are no reviews yet.

Be the first to review “Lenz Gold 10433-01 8 Pin Decoder”